| Peer-Reviewed

Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS

Received: 1 November 2017     Accepted: 20 November 2017     Published: 18 December 2017
Views:       Downloads:
Abstract

In this article dispersive liquid–liquid microextraction [1, 2] based on the solidification of floating organic drop (DLLME-SFO) [3] was successfully used as a sample preparation method prior to flame atomic absorption determination of trace amount of copper in standard and wastewater samples [4]. Several factors that may be affected on the extraction process, such as extraction and disperser solvent, the volume of extraction and disperser solvent, effect of salt, pH of the aqueous solution and extraction, time and Ions effect were optimized [5]. Under the best experimental conditions, the calibration curve was linear in the range of 0.8 ng mL-1 - 0.5 μg mL-1 of copper and detection limit was 0.2 ng mL-1 in the original solution (3Sb/m). The relative standard deviation seven replicate determination of 0.1 μg mL-1 copper was ± 1.9%. The high efficiency of DLLME-SFO to carry out the determination of copper in complex matrices was demonstrated. Finally, the proposed method has been applied for determination of trace amount of copper in standard and wastewater samples of Sarcheshmeh Copper mine and other factory with satisfactory results.

Published in Science Journal of Analytical Chemistry (Volume 5, Issue 6)
DOI 10.11648/j.sjac.20170506.15
Page(s) 104-106
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

DLLME, Solidification, Wastewater

References
[1] F. Priego-capote, M. D. Luque de Castro, Trends Anal. Chem. 23 (2004) 644.
[2] V. Camel, Spectrochim. Acta Part B 58 (2003) 1177.
[3] M. Ma, F. F. Cantwell, Anal. Chem. 70 (1998) 3912.
[4] H. Prosen, L. Zupancic-Kralj, Tends Anal. Chem. 18 (1992) 272.
[5] S. Bjergaard, K. Rasmussen, T. Halvorsen, J. Chromatogr. A 902 (2000) 91.
[6] G. D. Christian, Anal. Sci. 15 (1999) 1033.
[7] A. Skoog, M. Donald, Fundamentals of Analytical Chemistry, 4th ed., Holt-Saunders International, 1982.
[8] M. F. Apendurada, J. Chromatogr. A 889 (2000) 3.
[9] N. Compillo, R. Penalver, I. Lopez-Garcia, M. Hernandez, J. Chromatography A, 1216 (2009) 6735.
[10] T. Chen, C. Breuil, S. Carriere, TAPPI J. 77 (1994) 235.
[11] P. D. Mc Donald, E. S. P. Milford “Solid Phase Extraction”, Walters, Milford, MA, 6th ed., 1992, p. 287.
[12] W. L. Hinze, E. Pramauro, CRC Crit. Rev. Anal. Chem. 24 (1993) 133.
[13] D. M. Templeton, F. Ariese, R. Cornelis, L. G. Danielsson, H. Muntau, H. P. Van Leeuwen, R. Lobinski, Pure Appl. Chem. 72 (2000) 1453.
[14] T. Kumazawa, X. P. Lee, K. Sato, O. Suzuki, Anal. Chim. Acta 492 (2003) 49.
[15] H. Kataoka, H. Lord, J. Pawliszyn, J. Chormatogr. A 880 (2000) 35.
[16] J. P. Hutchinson, L. Setkova, J. Pawliszyn, J. Chormatogr. A 1149 (2007) 127.
[17] A. Bidari, E. Zeini Jahromi, Y. Assadi, M. R. Milani Hosseini, Microch. J. 87 (2007) 6.
[18] P. Vinas, I. Lopez-Garcıa, B. Merino-Merono, N. Campillo, M. Hernandez-C´ordoba, Anal Chim Acta 535 (2005) 49.
Cite This Article
  • APA Style

    Farzaneh Arabpour, Sayed Zia Mohammadi. (2017). Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS. Science Journal of Analytical Chemistry, 5(6), 104-106. https://doi.org/10.11648/j.sjac.20170506.15

    Copy | Download

    ACS Style

    Farzaneh Arabpour; Sayed Zia Mohammadi. Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS. Sci. J. Anal. Chem. 2017, 5(6), 104-106. doi: 10.11648/j.sjac.20170506.15

    Copy | Download

    AMA Style

    Farzaneh Arabpour, Sayed Zia Mohammadi. Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS. Sci J Anal Chem. 2017;5(6):104-106. doi: 10.11648/j.sjac.20170506.15

    Copy | Download

  • @article{10.11648/j.sjac.20170506.15,
      author = {Farzaneh Arabpour and Sayed Zia Mohammadi},
      title = {Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS},
      journal = {Science Journal of Analytical Chemistry},
      volume = {5},
      number = {6},
      pages = {104-106},
      doi = {10.11648/j.sjac.20170506.15},
      url = {https://doi.org/10.11648/j.sjac.20170506.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjac.20170506.15},
      abstract = {In this article dispersive liquid–liquid microextraction [1, 2] based on the solidification of floating organic drop (DLLME-SFO) [3] was successfully used as a sample preparation method prior to flame atomic absorption determination of trace amount of copper in standard and wastewater samples [4]. Several factors that may be affected on the extraction process, such as extraction and disperser solvent, the volume of extraction and disperser solvent, effect of salt, pH of the aqueous solution and extraction, time and Ions effect were optimized [5]. Under the best experimental conditions, the calibration curve was linear in the range of 0.8 ng mL-1 - 0.5 μg mL-1 of copper and detection limit was 0.2 ng mL-1 in the original solution (3Sb/m). The relative standard deviation seven replicate determination of 0.1 μg mL-1 copper was ± 1.9%. The high efficiency of DLLME-SFO to carry out the determination of copper in complex matrices was demonstrated. Finally, the proposed method has been applied for determination of trace amount of copper in standard and wastewater samples of Sarcheshmeh Copper mine and other factory with satisfactory results.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Determination of Trace Amounts of Copper in Samples of Sarcheshmeh Copper Mine Using Dispersive Liquid-Liquid Microextraction Based on the Solidification of Floating Organic Droplets Prior to FAAS
    AU  - Farzaneh Arabpour
    AU  - Sayed Zia Mohammadi
    Y1  - 2017/12/18
    PY  - 2017
    N1  - https://doi.org/10.11648/j.sjac.20170506.15
    DO  - 10.11648/j.sjac.20170506.15
    T2  - Science Journal of Analytical Chemistry
    JF  - Science Journal of Analytical Chemistry
    JO  - Science Journal of Analytical Chemistry
    SP  - 104
    EP  - 106
    PB  - Science Publishing Group
    SN  - 2376-8053
    UR  - https://doi.org/10.11648/j.sjac.20170506.15
    AB  - In this article dispersive liquid–liquid microextraction [1, 2] based on the solidification of floating organic drop (DLLME-SFO) [3] was successfully used as a sample preparation method prior to flame atomic absorption determination of trace amount of copper in standard and wastewater samples [4]. Several factors that may be affected on the extraction process, such as extraction and disperser solvent, the volume of extraction and disperser solvent, effect of salt, pH of the aqueous solution and extraction, time and Ions effect were optimized [5]. Under the best experimental conditions, the calibration curve was linear in the range of 0.8 ng mL-1 - 0.5 μg mL-1 of copper and detection limit was 0.2 ng mL-1 in the original solution (3Sb/m). The relative standard deviation seven replicate determination of 0.1 μg mL-1 copper was ± 1.9%. The high efficiency of DLLME-SFO to carry out the determination of copper in complex matrices was demonstrated. Finally, the proposed method has been applied for determination of trace amount of copper in standard and wastewater samples of Sarcheshmeh Copper mine and other factory with satisfactory results.
    VL  - 5
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Sarcheshmeh Copper Mine, Kerman, Iran

  • Department of Chemistry, Payam Noor University, Tehran, Iran

  • Sections